Second you need to modify a few of the AE sync to async and BPW values and set the fuel mode to
PFI.
Switches:
1 CPI or PFI 1=PFI
Constants:
Sync to Async BPW<= 1.296998 Msec
Async to Sync ( Or PFI Double Fire) 1.495362 Msec
AE Min Aysnc or TBI Min Aysnc PW 1.90735 Msec
AE Max Aysnc or TBI Max Aysnc PW 6.10352 Msec
Low BPW Offset vs BPW Table Bias .0305176 Usec
Min Period Double Fire 0 Usec
Deg Delay From DRP to Inj Fire 0 Degrees
Sync Min BPW 1.296998 Msec
Sync Default BPW 1.693727 Msec
Cylinder Volume 1.0266 L/Cyl
Injector Flow For TBI 6.335433 Gms/Sec *OR* Injector Flow for PFI 12.67087 Grams
Async to Sync if Map > (TBI Only) 104.4 kPa
Async to Sync if RPM > (TBI Only) 6375 RPM
Sync to Aysnc if MAP > 104.1 Kpa
Sync to Async if RPM > 6350 RPM
Bookmarks