sounds like youre halfway there with the dizzy simple module swap and its ready
sounds like youre halfway there with the dizzy simple module swap and its ready
Cool-so if I use the big distributor does the 8 pin bolt in where the original was or do I need to drill new holes etc.? Then,what ECM would I need-the one that went with the TBI unit I plan to use?
Speed
The 4 pin module and 7 pin module will fit in the same holes. (Top two modules in the pic below)
7 Pin Module is used with a Large Cap HEI that has the ignition coil in the cap.
8 Pin Module is used with a Small Cap HEI that has a remote mounted ignition coil.
dave w
Last edited by dave w; 12-10-2014 at 10:16 AM.
Bookmarks