no. 30lb injectors are huge for any 350 LT1 with a head/cam build.
no. 30lb injectors are huge for any 350 LT1 with a head/cam build.
So 30 will work? Where best place to get them
wherever you like, what's important is: any injector you buy, it should have a data sheet with injector offsets available
I need a set of injectors as well, but where to go so the right size and data sheet supplied? These are for a TPI set up on a 383..
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
for 'reasonably cheap' but good, i'd look at racetronix's injectors (accel's newer black/silver metal body are **the same injectors**). they seem to have a good spray pattern, good data sheets, and aren't crazy expensive. my last set served me very well.
ironically for a 383 tpi, buy the LT1 injectors from this guy when he takes them off, since that tpi's VE will fall off on the top end, they'll probably be plenty of fuel.
how do u Change To Fuel/Air Ratio Vs. RPM at WOT? whats each part of spread sheet mean?
are you using EE with my xdf file? or is this a '92-93?
Bookmarks