How are you gonna run the IAC on an LS1 throttle body?
How are you gonna run the IAC on an LS1 throttle body?
Some parts came in, waiting on my elbow. I got a throttle body off a 6 liter truck motor. Its pretty nasty, needs cleaned up. The intake has no vacuum ports so I am going to have to fabricate something to bolt a MAP sensor too and some way to hook the power brake booster up. I have a friend with a tig so that's no problem.
For the whole setup being Chinese, I am pretty happy with the quality. The ports need a little cleaning up, and some gasket matching.
LT1 injectors went right in.
This thing might make some serious power...LOL
-1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
-2002 Cavalier, Tuned with HP Tuners
-1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)
Looks great you got a link to where you got the setup?
http://www.professional-products.com/
Just look around online for the cheapest prices, most of this came from Amazon
-1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
-2002 Cavalier, Tuned with HP Tuners
-1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)
Thinking about buying a boost gauge with a 0-5 volt output so I can log boost. I have my wide band connected to my Autoprom and log AFR through it. Can the boost gauge be hooked to a unused 0-5 volt input on the PCM. Its been a while, I cant remember, seems like it could be done through the EGR or the CPI stuff.
-1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
-2002 Cavalier, Tuned with HP Tuners
-1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)
You could use a MAP sensor (2 or 3 BAR), and connect it to another ADC channel of the AutoProm.
I'm not aware of any boost gauge that has a 0-5V output similar to a WBO2, but if you find one, definitely post back, because that would be interesting and useful.
The man who says something is impossible, is usually interrupted by the man doing it.
-1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
-2002 Cavalier, Tuned with HP Tuners
-1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)
Mocked this bad boy up last night. Going to have to get creative with my throttle bracket. I need and extra vacuum port for my power brake booster, so I will have to drill and tap the intake for that. This intake has no vacuum ports. Not sure what water neck I am going to use. Going to clean some wiring up while I am in there too. Getting ready for a hair dryer...
I also decided against the intake elbow, apparently when you run one of these NA it can cause the back cylinders to run lean. So I went with this style TB and will be using a carb hat to blow through.
-1999 Hugger Orange SS, LS2 402 T56, 9 inch Ford 3.90 gears, Tuned with HP Tuners
-2002 Cavalier, Tuned with HP Tuners
-1994 Full Size Blazer ,383 TBI 4L60E, 4.10's, Tuned with Tunerpro RT (Where it all began)
Looks nice, now I have something else to put on the Christmas list.
Buddrow
If it don't fit force it, if it don't force fit f&%@ it!
Bookmarks