yes once it goes closed loop then blms are now moving!!... did another couple logs.. got another ecu modded and warmed up and ran for 15 mins.. no problems with prom or limp mode like befor so i think im good that way... blms mostly pegged at 108 so im gussing thats to rich.. backfires through carb when a rev is attemted. i checked to make sure distibutor is timed at 0 like it should be. anyway it dont stay closed loop.. does for a while then goes open and then goes closed again..If you could take a look at the logs and maybe we can adjust the bin a bit.. i did 1 log after the other and the engine never was shut off between them..
Reply With Quote
Bookmarks