check engine light

[degen]

Thanks fastacton now its working

[degen]

Now theres only to fix the trouble codes: 12 is normal , 13 oxygen sensor circuit open?, 24 VSS (vehicle speed sensor) circuit low anyway to disconect it or just let it be? 44 lean exhaust. Any one know how to fix these?

[fastacton]

Fix 13 before you worry about 44, it may go away. It sounds like your O2 sensor doesn't have a complete circuit. Make sure you don't have an open circuit between D7 and your O2 sensor connector, then make sure your exhaust system is grounded. If those are ok, you might have a bad O2 sensor. Are you running a VSS? If so, how do you have it connected? If you're not running a VSS, you can ground B10 to make the ECM think you're in neutral. You can also burn a chip to get rid of the VSS code.

[degen]

Thanks again. No I don`t have a vss I have the original th400 from -70. and the O2 sensor is new but I´m not shure about the ground of the exhaust so I will ground it again so Im shure