how much area the cables? im interested....
$300, first post of this thread.
http://www.gearhead-efi.com/Fuel-Inj...-AVT-852-cable!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Can VATS be disabled/VIN# changed with this software?
Tony
'88 Jeep Grand Wagoneer (aka Babywag)
'67 Jeep J3000
'07 Dodge Magnum SRT8
Antus, I am sure with christmas coming up your even more busy like the rest of us are, but I am going to ask anyway. Any updates on the flash version of the software?
@babywag: you can change vin, but not vats until it can write a calibration.
@mecanicman: Sorry no updates.
Will donations help move project along? I would hate to buy an AVT cable and have the project die out.
I bought a 99 sierra yesterday and picked up my avt cable today. Decided the sierra would be by first victom to try the ls1 flash tool on. I was able to connect and identify pcm no problem, showed me vin, pcm id, ect. I then tried to read the bin. Got some errors and turn my check engine light on and truck would not start. Hooked up with hpt and connected and check engine light went away and it started. Tried this a couple times with same results. This was with version 1.05. I tried version 1.04 and it crashed and gave me log when I tried. I then hooked up and read the bin out with hpt without issue. I am running windows 7, is it my pc or something wrong with cable. Anyone else use windows 7 and have any issues?
Antus, I have screen shot of what ls1 flash says when it fails and the crash log if you want them.
Last edited by mecanicman; 01-11-2014 at 07:19 AM.
So after it was explained to me that this software was intended for benchtop flashing only, I have put together a benchtop harness and it works great! I have pulled all kinds of bin files to ad to my collection, not one issue so far. It is a little bit slower than hpt in its current form(236 seconds as opposed to hpt 132 seconds on same pcm), but I have had zero issues. Vey excited to have a working flashing version. So Antus, how goes the progress?
Bump! Would also like to know if there has been any progress made.
Also, Is the cable that comes with the Jet Dynamic Spectrum tuner the same one that is needed for this? If one already had this package could that cable be used with the application being developed?
-neruve
I'm sure everyone knows about this by now but I don't see it here so I'll post it:
http://www.thirdgen.org/forums/diy-p...ml#post5844169
Does anyone have any TunerPro XDFs that support '02 and above OS for the 0411?
Bookmarks