Every time i click connect i keep getting errrors. It does it automatically and i keep getting errors after error until i stop it. 94 LT1 Using TunerPro rt with adl cable. Any help would be appreciated.
Every time i click connect i keep getting errrors. It does it automatically and i keep getting errors after error until i stop it. 94 LT1 Using TunerPro rt with adl cable. Any help would be appreciated.
Are you using dc/ac converter to power lap top in vehicle?
89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
05 Outback XT 2.5L turbo gas auto
Which COM port are you trying to connect with? Usually USB ALDL cable will connect with COM ports 4 or above. Maybe you need to check the port settings in the Device Manager and update the USB ALDL driver?
dave w
And there's lots of $EE LT1 ADX files that are just not set up correctly and don't connect. Which one are you using?
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I got my files from the Tuner Pro site for the manual transmission.
The files on TunerPro website do not work.
Go here and there is a link to the latest files. Also in this thread are many other things that are helpful to the LT1 $EE Mask.
http://www.gearhead-efi.com/Fuel-Inj...ull=1#post3131
Until they are completer here is a link to where the latest files will be at:
http://resfilter.net/files/carstuff/...DF_CURRENT.zip
Thanks for sharing your work steveo!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Thanks for the info. I will give this a try.
Bookmarks