Hey guys,
I hope I posted this in the right spot, if not just move it for me. I wanted to share my build that Im working on right now. Also would like some input on certain things tuning wise.
Its a 1995 Chevy Silverado 1500 4x4 with SF 14 bolt rear 3.73 gears (I know I should 4.56 o well) and 33/12.50/15 and 3 inch body nothing crazy. Oh and rusted a little! lol
Motor:
(I know it says 355 in thread title but the machine shop took .040 instead of .030 and I didn't know this until after I started thread lol)
95 block 350/357 .040 over KB pistons etc. blah blah w/ Vortec #062 heads, PRW Sportsman roller tip rockers 1:5
Flowtech mid-length headers and matching Flowtech Y-pipe to 3inch off collector, back to a Flowmaster Series 10 and 2.5 dual out.
No cat, Innovate Motorsports LC-2 wideband O2 sensor, EP381 fuel pump, Quick Fuel Hot Wire Kit.
Not sure on compression ratio just had things surfaced want to keep it on pump gas, daily driver.
Went with a roller cam because the block had provisions to:
http://www.compcams.com/Company/CC/c...?csid=198&sb=2
Matched Comp 981 valve springs etc.
46.5mm/595 cfm TB, adjustable fuel pressure regulator and gauge from:http://www.rvmorsemachine.com/
Edelbrock Performer Dual Plane Intake and TBI adapter, Hypertech Powercharger.
EGR Delete
Stock Ignition/Coil
AC Delco R44LTS plugs
Might of missed something..
Transmission:
Keeping 4L60E even though it would be nice to go to a 4L80E.
Red Eagle 8 clutch 3-4 pack and Kolene Steels
"The Beast" sunshell and Alto Carbon Fiber 2-4 band
Sonnax Performance Pack and new separator plate: http://www.sonnax.com/parts/2928
Sonnax 2nd Gear Super Hold Servo:http://www.sonnax.com/parts/2486
Sonnax 4th Gear Super Hold Servo:http://www.sonnax.com/parts/2473
Revmax Torque Converter 2200-2600 stall:http://www.revmaxconverters.com/index.php/4l60e.html
Tune:
Also picking up the Ostrich 2.0 from http://www.moates.net/
Tuner Pro RT on my MacBook Pro with Parallel Wizard and then I downloaded Windows 7 Ultimate. So I can have my Mac software as well as Windows on the same computer. Pretty Sweet!
Think thats it. This is the only somewhat current picture of it I have right now..I will get more once I get rolling on the build itself.
Timeframe will late April early May it should be done.
Questions or advice feel free!
Thanks
Max
Bookmarks