Changing Stoich in $0D

[EagleMark]

It won't change how engine runs. Just how the ECM/PCM starts it's fueling calculation. The only thing that will change is BLM readings from having a proper starting point.

[brian617]

It won't change how engine runs. Just how the ECM/PCM starts it's fueling calculation. The only thing that will change is BLM readings from having a proper starting point.

Thats the way I understood it after searching and reading today. And since I haven't adjusted my fuel tables yet I thought I would make the correction to the AFR before I corrected the BLMs.

Again I dont see where to change it, in my Engine Constants all I have is Injector Flow Rate and Cylinder Volume.

Is it something I have to add in?

[EagleMark]

That's where it is in my $0D which is not stock, I re-organized and made it simpler. Use Tools, Parameter Finder and search for it. "Stoichiometric AFR"

[brian617]

Did the search and found it only under "Open Loop AFR Parameters"?

[EagleMark]

So why the question?

Like I said I've moved a lot around in mine from stock $0D. But there's only one.

[brian617]

I guess I just assumed it would only apply to open loop and not work in closed loop?

[EagleMark]

The other way... this is the target for Closed Loop. In Open loop there is a seperate table.