please convert this .bin to a .cal splease dont have my laptop
please convert this .bin to a .cal splease dont have my laptop
I don't know how? How?
I usually just flash the bin into PCM and then read it out as .cal
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
well it was read out as a .bin just have to open it up in TC the it will let you save it as a .cal i ended up getting it remote accessed my laptop with my iphone through teamviewer. Thanks for the quick response
Here ya go.
Mark,this stuff mixes me up every time I try and remember what's what as well.
Yeah, I hate when that happens!
Usually keeping up around here keeps things in correct memory banks for next time...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
You can convert a bin to a cal and a cal to a bin, a bin to a jcl and a jcl to a cal, a bin to a ddc and a ddc to a cal. you can convert a hpt to a bin and a bin to an hpt also. You can also convert a bin to a tun or what ever it is now.
But some of you think I talk crap and can't back it up. Maybe I have special powers
TC.jpg
look at the time stamp. I had a hard time locating the programs.
The JCL to a cal file size is 0, but I can open it in TC just fine. Not sure what is up with that
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I can't convert them all,you mean you can lol.
I can convert well enough for my purposes thanks to help from friends,but that's about it.
John has an app to convert a cal to a bin. You will need to contact him for that app --> BTW I know a lot of tuners with this app
John has an app to convert all of his other Private Label file types to a cal. You will need to get that app from John. I really don't think you will get a app for the jcl to cal because you can tune with DST Demo version for free. The program I downloaded from the internet is a hack app and not from John. The app was pulled from the forum right after it was posted.
HPT to a bin. I have never done this, but I know how. You open the file in HPT. You go in to the PC's memory and extract it from the PC. I was told that HPT made a change and it is no longer possible, but I told a hacker about this and he extracted the bin from the current version of HPT. That is what he told me and I have not done it yet.
When HPT has the file open the file will be decrypted and entire. I have been told that you need to locate the file, extract it, then chop off the ends
I have also been told by another forum member that you can turn the HPT cable into a cable that reads bins. This member said he set up a Virtual Com Port and was able to read out the PCM. I think he used LS1 Flash as the read program.
You can find all of this information on the internet less what was loss on Monodax HINT HINT
That is the way I feel about it. I only use the one app. It took me forever to find the others. I don't feel right about using them since I was able to acquire a TC program. I have no problems paying $80 per VDF set when I need them. I don't even have DST on in my programs list.
Bookmarks