350 with 30lb injectors

[ZEDRATED]

Cold idle is fine, it's cold drive ability that is horrible and bogs out when releasing the clutch. It actually starts up and idles good but when I try taking off, as soon as I put a load on the engine (releasing the clutch in first) it bogs out and when you give it more throttle it then wants to launch.

[ZEDRATED]

I also tried an unmodified APYS bin and the car started, shut off, and wouldn't start again! Not sure if I got a bad bin file off this site but man this car is driving me nutso. I even held the throttle down and tried starting it and wouldn't start. As for the test bin, I know the IAC was maxed but that wasn't the problem as you can see me pushing the thottle down in the log and it was running horrible, just think that the IAC was maxed because something is way off.

[ony]

you are not listening try a stkock bin piss on the bin you got, do you want the thing to run or what?

[ZEDRATED]

APYS is a stock bin!

[EagleMark]

Cold idle is fine, it's cold drive ability that is horrible and bogs out when releasing the clutch. It actually starts up and idles good but when I try taking off, as soon as I put a load on the engine (releasing the clutch in first) it bogs out and when you give it more throttle it then wants to launch.

I told you many pages ago that there are differences between auto and manual bins. You didn't believe me then so why should you now?

Along with nothing else is correct. Why would cold start or drive work right?

But you still don't care or listen and are only interested in what you want to run right when. Not fixing the issue? Not tuning it correctly? Did you even read what xtremevette69 just told you 2 posts back? Did you address the issue?

Seriously 30 pages and still we have gotten no where!

[xtreamvette69]

Cold idle is fine, it's cold drive ability that is horrible and bogs out when releasing the clutch. It actually starts up and idles good but when I try taking off, as soon as I put a load on the engine (releasing the clutch in first) it bogs out and when you give it more throttle it then wants to launch.

sigh.. take my word for it or dont, it might be idleing fine or seem to but its not and if its choking at idle what do you suppose would happen if you drive it? not a complicated scenario till iac is fixed by opening TB more nothing else matters.

and again, no bin you try is going to be a perfect pop it in and alls well.. they will all need work but as i have said this one wouldnt be the one i would choose to base the bin build off of, its just one that you mentioned wanting to try/test out.

[EagleMark]

Thread closed!