Ok thanks for that. Appreciate the info, I dont have one of those PCMs so its your report that gets it added. Ive attached a 1.05 beta to this post (will remove it later). It has that pcm type included as a 1Mb, if you can test and let me know that would be great.
Write is still progressing, too, and things are looking good.
edit: beta removed
Last edited by antus; 08-05-2013 at 10:35 AM.
I just tried to read with V1.05. When I click on "Identify PCM" I get an error message "Failed to Read Block10"
Here is the .bin from that PCM read out with Tunercat. It is a 2007 PCM #12602801 with a 2004 calibration OSID #12587603
Jeff
98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.
Is the connection to the pcm ok, ignition power on? Thats what it'll say if it can talk to the avt but the pcm isnt replying (block 10 is the first thing it tries to read).
I just got into work. I won't be able to check it for about 10 hrs. I will try it again tonight.
Jeff
98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.
V1.05 works great. The problem was on my end----Sorry about that. I did have a bad connection. A connector was not fully seated.
Jeff
98 GMC RCSB, 5.0, 4L80e, Moser M60, 4.10 gear, Homemade twin turbo w/Junkyard T3 turbos, 24x CNP, 12200411 PCM.
Excellent, thanks for the report
I think I might add a usability tweak and put an error about check your connections in, instead of just "failed to read block 10" which is not so clear.
Bookmarks