hi, how can I copy a spark table from $0d to $ 42 bin with out doing it 1 cell at a time?
hi, how can I copy a spark table from $0d to $ 42 bin with out doing it 1 cell at a time?
You can't. The tables are different.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I will fumble around with the excel and see what I can do, iwas wondering the engine in my truck came out of one that was$0d, they run a little more agresive timming and things, [ just playing kindof bored]
I forgot to ask , after you 0 out v2 table and you get v1 where you want it, should you put v2 back to the original setting and subtract it from v1? I am starting not to remember I guess.
Actually that is good thinking ony!
When you open TunerPro you can open a second TunerPRo to have both $42 and $0D bins open the same time and copy from one to another, but not entire table because they are different sizes.
Tunerpro, Tools, Custom Tools, New TunerPro Instance. Poof! 2 of them!
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
thanks for the replys, I am still pitling with my sync bin,it seams to run more timming without knock counts. is any one here running dish internet, we have hughs net it only seams to work right on Friday, thinking of changing net providers!!!
1994 3500 Dually , 502 (509) , 264HR , Edelbrock MPFI , PFI '7427
1992 S-10 434 SBC/Tremec - '7427
1986 Monte Carlo SS
1984 S-10 , SAS, 496/700R4/205 , D44/14BFF -'7427
1980 Z-28 496/700R4
1979 Corvette 496/700R4
1977 Olds 98 Regency 403/700R4
Bookmarks