Quote Originally Posted by Playtoy_18 View Post
I used Techline coatings,I've seen some of the Cera-Kote stuff but it's only for gun stuff that i've seen it used.
The coatings weren't hard to spray,Moly and thermal stuff laid down nicely-The ceramic based was finicky but not bad-The piston/CC stuff I screwed up at least once on everything I sprayed. It was the worst,but could also have easily been me since I don't do much spraying at all.
Cerakote actually does make a separate line of coatings geared towards the auto industry and they have a separate website for it. The site for the thermal/ceramic coatings is http://www.cerakotehightemp.com/ . They have moly and also multiple different ceramic/thermal coatings similar to the techline stuff you used. The only major drawback to the cerakote stuff that I know of is the serious pricetag it carries. I haven't looked into the techline stuff yet, but I will as I was curious about using some coatings on a couple projects.