Only makes sense if you did not add the WB to the ALDL Definition file? That was what I did wrong the first time....

Go to Acquisition and load your Definition file, then go to Acquisition and click on Edit Definition. What I do at this point is save the definition file in another name so if I mess it up I have the original to fall back on. So Save As (Make new name or add V2) Then go back to Acquisition and Edit Definition file again and add a value.

Here's a write up from the Moates site that shows how to add a value, it looks a little different, maybe TPV5 but it has all the parameters you need to enter to add a value to your definition file.
http://www.moates.net/zips/wideband_dat ... ro_lm1.pdf