according to the database in tinytuner, it MIGHT.
according to the database in tinytuner, it MIGHT.
1995 Chevrolet Monte Carlo LS 3100 + 4T60E
that would be awesome!Originally Posted by RobertISaar
anyone have instructions on how to make a bench to flash/ read a PCM on?
doesn't seem like it would be that hard, 12V power supply, a DLC, and a switch. I have an old computer PS, and IIRC, they are 12V right?
I just looked up that PCM and it looks just like the 0411 which the Roadrunner is...
http://www.hptuners.com/forum/showth...-Bench-Harness
and the benchtop I made...
http://www.gearhead-efi.com/Fuel-Inj...amming-harness
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
thats all I thought there was to it, thanks!
as for the RR 0411Vs V6, they are the same case, but the chips are not in the same place on the inside.
for your viewing pleasure, it's now a table, showing a couple of the main pinouts I've used to create this.
still working on it, added the "0411" for shits and giggles, and also added in the L67 pinout. next will be the 99-02 firebird, it should be a little different, as it uses DBW. we'll see.
ok, worked out a couple of typo's in the original chart, and added the 2002 firebird pinout. I also removed the 0411 from the original and created a second chart specifically for it. Next project will be to trace out all of the generic pin listings to get better definition.
Posting Permissions
Reply With Quote
Bookmarks