Quote Originally Posted by Davis_1377 View Post
Im guessing the hp would be around 230-250. Fuel pressure I have not checked but my blm and int stay around 128 if its right. The injectors ive not looked at yet either i just know they are stock.
That's a lot of cam for stock intake, TBI and heads! Let's hope it's more then 250 HP, but getting to the 6000 RPM range is going to be an issue.

Your INT and BLM of 128! Not possible at 60 MAP and 550 RPM... Must be in Open Loop! System has to go Closed Loop to see fueling changes in INT and BLM.

Don't do any WOT high RPM runs until you get some things figured out. Stock injectors and fuel pressure is no where near enough to fuel that engine, your going to be lean at WOT high RPM.

Do you have any data logs? Post them up so we can see what is actually going on.