using datamaster to log my tune i found something wrong.

Lterm BLM's are comming in at 120, but the Sterm are balanced out at 128. I don't have exhaust leaks.

Please look at my datalog and help me to pick it apart. I have blended the table in vemaster, and am waiting to upload it to see if the patch has brought me closer to 128.

below are my VE tables: starting from 20kpa up to 65kpa in increments of 5

36.3 39.5 40.6 42.2 45.3 48.4 48.8 51.2 53.9 55.9
40.2 43.0 44.5 46.5 49.6 53.5 53.9 56.3 59.0 61.3
42.2 45.3 47.3 49.2 52.7 56.6 57.0 59.8 63.3 64.8
44.9 48.8 50.8 53.1 56.6 60.9 62.1 65.2 68.4 69.5
47.7 50.8 53.1 55.5 59.4 63.7 65.2 68.4 71.1 72.3
47.3 52.3 55.5 57.4 60.9 65.2 66.4 69.1 71.9 73.4
50.8 54.3 56.6 58.2 61.7 66.4 67.6 69.5 71.9 73.4
52.7 56.3 57.8 59.8 62.5 67.6 68.8 70.3 72.3 73.8
56.6 60.2 62.1 64.1 66.8 70.3 73.0 74.6 77.0 78.1

My question now is how do I get my BLM's to balance closer to 128 and not a lean 120? Thanks in advance