But then the other switch (the top one in the pic below) should have a pink/black and purple pair connected to it with the purple going to the PCM (E13 on '7427, A12 on '7060/'7747). But this switch is non-functional - plunger is gone - and the purple and pink are jumpered together. This explains why my PCM thinks the brakes are never applied. I had tuner pro data logging on and I tested this by removing the jumper - brakes registered on. So....I know I need to replace this switch, but I don't know what it's called. Haven't been able to find it on Rock Auto or anywhere else.
In the diagrams it's listed as ABS brake switch.
89 K1500 Scottsdale 5.7L 5spd 3:42 RamJet cam Dart iron TBI heads 427 PCM swap
95 C2500 Cheyenne 6.5L turbo diesel 4L80e 4:10 DB2-4911 Manual pump conversion 0411 PCM trans control 2Bar COS
05 Outback XT 2.5L turbo gas auto
Bookmarks