Just got my wideband installed, powers up and displays correctly, but I can't get the logging to show up in EEhack.

I put a switch on my A/C pressure sensor as I still use A/C, and that seems to be working correctly as when I toggle the switch the readings on my A/C pressure go to some crazy negative number, and then back to normal when i toggle it back.

I'm using the white Analog wire to try and log. I have wideband enabled in EEhack and didn't touch any other settings. I did mess with the range adjustments some but all it would do on the dashboard is default to the low point and sit right there regardless of what my actual AFR gauge was reading. Is there something simple I'm missing here?

Brandon