LS Injector Data for LT1

[Terminal_Crazy]

You need to have:
1. fuel flow vs vacuum
2. injector offset vs vacuum vs voltage
3. low BPW injector offset.

Than you can use the patch I have.
It is well tested so far and it is the best mod I have done so far.

Injectors have been ordered from Fuel Injector Clinic so hopefully should be perfect.
They'll take a week to get here.

Is this using the later returnless style fuel sytem info?
Does this allow live updating the VE tables you mentioned a while back?

I'd love to but need to get the car running back good state first.
Which kpa column would I use for the std LT1 $EE pcm? car is running at the std 3 bar system with std vacuum FPR.


Cheers
Mitch