So after successfully tuning my first chip for my '95 S10 4.3L I think I am ready to tackle another project.. I was told that because I have an L35 long block, with an LB4 intake that I should run the bigger injectors from a 5.7L (61 lb/hr). I just want to be sure I have the correct info..

I need to change the injector flow rate (TBI lb/hr) from my current 46 to 61

Also the injector offset vs. battery voltage table needs to be copied from the 5.7 bin over the 4.3

Anything else I missed? I tried searching and there wasn't a clear cut topic or answer, so I created my own