Results 1 to 10 of 10

Thread: 4t65 force motor current vs psi vs temp question

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 01-12-2016 #1
    mg01074
    mg01074 is offline
    Carb and Points!
    Join Date
    Apr 2014
    Age
    44
    Posts
    4

    4t65 force motor current vs psi vs temp question

    Hi guys
    I'm working on a 05 Bonneville sle 3.8 na 4t65e. I'm wanting to up the line pressure in the trans and i think this is the right table but the psi in the table doesn't make sense. With a mechanical gauge on the trans main line pressure is way over these psi numbers, over 200 depending on current. Any help would be great..Thanks

    Attachment 10125
    Last edited by mg01074; 01-12-2016 at 09:39 PM.
    Reply With Quote Reply With Quote
« Vortec 1997 BlackBox to 0411 PCM | 1991 Isuzu Impulse RS (Delco Management) »

Similar Threads

  1. Delta force tuning software/interface.
    By Playtoy_18 in forum Ford EFI Systems
    Replies: 18
    Last Post: 12-15-2018, 02:27 AM
  2. (Simple?) question: How to force Open Loop Idle in TunerPro with a 7747
    By Dr_Grip in forum GM EFI Systems
    Replies: 1
    Last Post: 11-05-2015, 02:33 PM
  3. New to tuning. Concered about my current bin file?
    By Woods in forum GM EFI Systems
    Replies: 6
    Last Post: 01-18-2014, 06:28 AM
  4. spark advance temp.correction vs.load vs.temp
    By myredprky in forum GM EFI Systems
    Replies: 0
    Last Post: 11-06-2013, 04:47 PM
  5. How do I save my current tune to my PC?
    By fuzzcar in forum GM EFI Systems
    Replies: 2
    Last Post: 05-24-2013, 08:32 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules