OK.... I have tried every adjustment that I can find and I still cant get any PE spark advance when in PE mode. I have it on my dash and have verified with the logs that when it enters PE mode, the timing is steady and no advance is added from PE.

Remember, this is the bin that I have added 50 degrees of initial timing to make the offset work and run DIS and I feel sure that is the problem, but everything else makes sense except this one item. No matter how many degrees (even - degrees), no change to the timing when in PE mode. I do remember having to set the PE down when running a distributor, but I dont see myself going back that way.

My bin file is attached for review.