I have been trying to get my DFCO to activate more frequently. I have lowered the timer down to 2 seconds (from 6.5 seconds OEM setting).

i am now playing with the setting labeled "Maximum MAP for DFCO" located at 0x4934. OEM setting is 31 Kpa in the BJYN bin.

What does it actually control? Rather than a maximum setting for enabling DFCO, it seems more like the MAP has to DROP by that many points when the throttle is closed (as compared to when the throttle was open) before DFCO is enabled.

Yes? No? Other ideas?

There are times when I an driving and I expect DFCO to be enabled, but it never happens. And this "difference" theory is the only one I can come up with.