Results 1 to 15 of 21

Thread: Combining .bin files .....

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 02-10-2012 #1
    Nasty-Z
    Nasty-Z is offline
    Fuel Injected!
    Join Date
    May 2011
    Location
    Pocono's PA.
    Age
    51
    Posts
    370

    Combining .bin files .....

    Running a TBI 454/700R4 in my '84 S10 Blazer ('7427 PCM ) , on this incarnation I kicked around the idea of going with a 4L60E so I can have PCM control of engine and trans .

    Using the '7427 PCM right now , I have .bin's for $0E for 454/4L80E and .bin's for $0D for 350/4L60E , but obviously nothing for a 454/4L60E in either mask

    Anyone who can guide me through either copying the 454 engine parameters to the 350/4L60E $0D .bin , or the trans parameters to the 454/4L80E $0E .bin ?

    I have never tried overwriting engine and/or trans before , and do not know exactally what all would need to be carried over for either instance.

    Or has somebody created a 454/4L60E .bin I could start with that I have not found ?

    Thanks for any advice or help

    TOM
    Last edited by Nasty-Z; 02-10-2012 at 05:07 PM.
    Reply With Quote Reply With Quote
« Need tunerpro XDF and ADX for 1228747 AKWA | Changing from $88 to $8D mask, bin. »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules