Alrighty then.
I loaded JeepsAndGuns .BIN file and tested it, The timing was set to zero and I started off with the CEL on that came back with a 42 & 43.

It was pinging from 1200 rpm on.

I also found that one of the pins on the chip was bent and it didn't look like it was connected. I fixed that prior to flashing the chip with JeepsAndGuns file.

I will reload the my original BIN file and see if that clears the error codes. if it does I will load the BIN file Dave modified to see if see if the SA and BPW start working in the data log.

More to come