Well I finally have some data to share.I guess this was the wrong time of year to make an Ubur-easy DIY cable with expectation of getting it shipped, assembled and working in a timely manner.Learning a little about TunerPro and a note to self (hit the record button dummy).

Some info on my Jeep, I have a AMC 401 bored .030 over 9.8:1 compression, Crane Cam H-260-2, TBI from a 454 (17087021) with 80lbs injectors MSD distributor and a Jacobs coil.

The issue I know are it ping a lot of the time and it backfire thru the TBI when I nail it (WOT)

So if some of you data crunching experts could look this over the data I would greatly appreciate the help.