Quote Originally Posted by EDZIP View Post
Don't know how far along you are with the wiring...but if you want a "really (really) good reference manual" pick up the one F-Bodies, Inc sells. Couldn't have made my TPI harnesses without it. They discuss every pin in both MAF and SD systems, what it does and whether it needs to be disabled in the ecm or just not connected.

There is one on eBay right now:

http://www.ebay.com/itm/ws/eBayISAPI...m=370221453669


If you get into a bind for TPI parts give me a shout..I target speed density stuff...but have MAF components in the mix.

Ed
Ed,
Thank you for the tip- I bought the book!
I've started working on the harness but I've only removed bits that I was 100% sure I didn't need but there are a lot of others that are questionable.
I believe I have pretty much all I need for this conversion but I'll let you know if I'm missing anything.
Thanks!
Elm