Good to know the tpi rails would work...I spotted a few pcs of aluminum at work/scrap pile and was thinking bore it, thread the ends and mill pockets for injector seals lol.

I assume with the different heads/valve placement the LS would be a poor candidate for a donor rail.....Guess that leaves the TPI as the only oem that will work..

When this finally pans out, I am coming up with a list of OEM donor parts that work. I want to make this easier for others.....







Quote Originally Posted by delcowizzid View Post
that manifold is a pic off thirdgen.org LOL.you should be able to use tpi rails but you can buy fuel rail extrusion cheap if needed ive bought it as low as $12 a foot from china LOL.or if you have the money all these setups can just be bought off the shelf