I will start by saying that I really enjoy this site. Great information and I hope that one day I will be able to help some one like I am about to ask for now. I have replaced the fuel pump, filter, CPI supply and return lines, EGR, IAC, Distributor, cap and rotor, wires, plugs, TPS, vacuum lines, intake gaskets upper and lower, O2 Sensor. Cleaned the upper intake checked for vacuum leaks, re-torqued the intake, Compression checks and even lapped the valves in both heads because I was bored..(Not really...I was just eliminating a PSI difference). I have downloaded TunerPro V5 along with what I think are the BIN ADF and ADX files that match my setup. The truck will not accelerate. Since I am newer to the ODB1 troubleshooting, I would like to see if anyone can spot my problem in the test run files. I am trying to get the truck going for my son. I have been working on it since June. Any help would be greatly appreciated as my savings account it not keeping up with the demands of this truck. Thanks in advance
Reply With Quote
Bookmarks