Results 1 to 15 of 35

Thread: Adding WBO2 to 1227747

Threaded View

Previous Post Previous Post   Next Post Next Post
  1. 08-15-2012 #1
    dave w
    dave w is offline
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,362

    Adding WBO2 to 1227747

    I've read through this post http://www.gearhead-efi.com/Fuel-Inj...light=wideband which talks about using WBO2 with the AutoProm. The question I have is there a way to get the WBO2 data into the data stream without the AutoProm. I have attached a '7747 WBO2 .adx file, but I did not see any notes on were to input the WBO2 0 ~ 5 volt signal? I'm using an Innovate MTX-L WBO2. The attached .adx seems to be already setup for the MTX-L.

    Any help is greatly appreciated,

    dave w
    Attached Files Attached Files
    Reply With Quote Reply With Quote
« Found a Hypertech chip in my junkyard PCM! | Autoprom unable to program »

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules