Results 1 to 2 of 2

Thread: Engine stalls when commiting changes in live tune

  1. #1
    Fuel Injected! carcaper's Avatar
    Join Date
    May 2012
    Posts
    39

    Engine stalls when commiting changes in live tune

    I have been trying to figure out why the engine stalls when I am in live tuning using tuner pro 5. When I commit to changes or upload to the current bin the engine stalls every time. I have to reload and remulate to get the engine started again. I have all the check box enabled to use whole tables in data aquishtion but that didnt make any difference. Also want to know why my guages won't keep the values I set them to after I exit tuner pro 5, when I restart the program the guages default, How do i fix this? I have had more trouble than ever using tuner pro this time around. I had better luck the first pc I had it installed on. I don't understand why I am having so much difficulty just becasue I loaded it on a different pc. The first time I used it it seem flawless and I was able to suceed. I am either getting dumb in my older age or something has changed drastically.

  2. #2
    RIP EagleMark's Avatar
    Join Date
    Feb 2011
    Location
    North Idaho
    Age
    63
    Posts
    10,477
    Couple things to try, have to disable checksum by setting mask ID to AA for emulating.

    Gauges should stay where you put them, it will prompt you to save changes to ADX file when closing TP V5 if you did not save the ADX after changes. Now if your talking about the dashboard it will always open to first in list when you open TP, have to pick which one you want.

    Memmory loss is one of three things that go when we get old, I forget what the other two are...

    1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
    1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
    -= =-

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •