Name is Bill (Bill Likescars on Fbook) my son bought a junk 1979 T/A with no motor I have a 1999 LM7 still in the truck I am planning a swap need XDF files for the old trucks brain. LOL
Name is Bill (Bill Likescars on Fbook) my son bought a junk 1979 T/A with no motor I have a 1999 LM7 still in the truck I am planning a swap need XDF files for the old trucks brain. LOL
Gearhead-efi OBD2 tuning link: http://www.gearhead-efi.com/Fuel-Inj...2-OBDII-Tuning
dave w
Would it be possible to reflash your PCM with a .bin file that has a .xdf file? Maybe a 2001 or 2002 LM7 .bin file?
dave w
I need to research what os's mine supports
GM made the following changes from the original 9363996 OS
9363996 N/A Operating system
9365637 N/A Change required to reduce rich fueling during tip-in.
9373372 N/A Calibration change required to correct an IAC reset error
9379910 N/A New software to engage A/C during engine crank to prevent A/C belt damage. Also enhanced park/neutral diagnostics.
I cannot find XDFs for those OS's either
I just need to figure out what os that has an XDF will run on my hardware. I have been trying to figure it out with weeks of searching
I'm not sure if starting over with a newer / different PCM makes sense or not. Perhaps purchasing a PCM that is flashed with an OS you can work with is an option?
For example: Flash Masters (an ebay seller) https://www.ebay.com/itm/17340783457...QAAOSw3v5YqKyg
The wiring for "Stand-Alone" 99-00 vs. 01-02 computers are the same, or perhaps a couple wires might need to swapped?
dave w
Bookmarks