Results 1 to 15 of 16

Thread: Need help finding stock calibration file of 12576106 5.3 DBW to work on 411 pcm 512kb

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. #1
    Fuel Injected!
    Join Date
    May 2016
    Age
    41
    Posts
    142

    Need help finding stock calibration file of 12576106 5.3 DBW to work on 411 pcm 512kb

    Hi, i swapped in a 5.3 DBW engine of a 2004 gmc xl truck and wiring with blue/green connectors of it, the pcm it had was 12576106 w.VATS, so I didn't take it.

    Want to use my 411 512kb PCM from moates with blue/red connectors to run it, but cant find any calibration file 512kb to run it. Does anyone have a clue where i can get one?

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,302
    Are the DBW Throttle Bodies the same green / blue PCM vs. red / blue PCM?

    For most 5.3 liter vehicle applications, 2002 was the last year for the '0411. DBW was used on 2002 Cadillac 5.3 liter and some 2002 GMC 5.3 liter.

    dave w

  3. #3
    Fuel Injected!
    Join Date
    May 2016
    Age
    41
    Posts
    142
    Quote Originally Posted by dave w View Post
    Are the DBW Throttle Bodies the same green / blue PCM vs. red / blue PCM?

    For most 5.3 liter vehicle applications, 2002 was the last year for the '0411. DBW was used on 2002 Cadillac 5.3 liter and some 2002 GMC 5.3 liter.

    dave w
    Quote Originally Posted by dave w View Post
    Are the DBW Throttle Bodies the same green / blue PCM vs. red / blue PCM?

    For most 5.3 liter vehicle applications, 2002 was the last year for the '0411. DBW was used on 2002 Cadillac 5.3 liter and some 2002 GMC 5.3 liter.

    dave w
    Hi Dave, truly not sure, have to figure all of that out, would appreciate any help, for now I have found limited information on repining the blue/green pcm wiring connectors to work with the blue/red pcm. But have found information that it is possible and that 411 pcm can run the lm7 5.3 DBW. Found at https://www.lt1swap.com/cable_conversion.htm

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,302
    According to the RockAuto, the DBW Throttle Body part numbers are different red / blue PCM vs. green / blue PCM.

    It appears to me the 0411 red / blue PCM will not work with the green / blue DBW Throttle Body.

    dave w

  5. #5
    Fuel Injected!
    Join Date
    May 2016
    Age
    41
    Posts
    142
    Quote Originally Posted by dave w View Post
    According to the RockAuto, the DBW Throttle Body part numbers are different red / blue PCM vs. green / blue PCM.

    It appears to me the 0411 red / blue PCM will not work with the green / blue DBW Throttle Body.

    dave w
    Even if you repin it?

  6. #6
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,302
    Quote Originally Posted by Aksl View Post
    Even if you repin it?
    According to Rock Auto, the Throttle Control Actuator (aka TAC Module) Red / Blue PCM vs. Green / Blue PCM are different part numbers. It appears to me the 0411 Red / Blue PCM will not work with the Green / Blue DBW TAC Module.

    Maybe a Drive by Cable (DBC) Throttle Body Conversion is an option? The 0411 has the correct Idle Air Control (IAC) circuitry for a DBC Throttle Body. The Green / Blue wiring harness can be repined for DBC.

    dave w

  7. #7
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,302
    2004 DBW Schematics attached.

    dave w

  8. #8
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,302
    2001 - 2002 DBW Schematics

    dave w
    Attached Images Attached Images

  9. #9
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,302
    Quote Originally Posted by Aksl View Post
    Even if you repin it?
    If the 2004 Green / Blue harness is repined for a 2001 - 2002 DBW Throttle Body, TAC Module, and Accelerator Pedal Position Sensor.

    2001 - 2002 DBW parts required.

    Schematics Posted above.

    dave w
    Last edited by dave w; 02-25-2021 at 07:31 PM.

Similar Threads

  1. Calibration file Identification
    By sachem in forum OBDII Tuning
    Replies: 2
    Last Post: 12-15-2020, 09:01 PM
  2. WB02 calibration in adx file?
    By mihela in forum TunerPro Tuning Talk
    Replies: 5
    Last Post: 06-01-2019, 12:50 AM
  3. Need help finding stock 1996 Impala tune
    By TonyT1996 in forum TunerCat Calibration Files
    Replies: 0
    Last Post: 03-30-2017, 11:04 PM
  4. Replies: 4
    Last Post: 09-14-2016, 08:02 PM
  5. L33 Stock Calibration file needed
    By 96HawkCnvt in forum TunerCat OBDII
    Replies: 4
    Last Post: 06-25-2013, 10:01 PM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •