Not quiet sure what is in the zip folder, so just overwrite it. That is the latest published tableseek in the link.
Not quiet sure what is in the zip folder, so just overwrite it. That is the latest published tableseek in the link.
Worked Searched MAFOriginally Posted by kur4o
No need to re-invent the wheel. But we can make it better
Any chance you could add the TCC off-throttle unlock settings? Basically its MPH and TPS settings that allow the TCC to stay locked when you lift off the throttle. HPTuners has them defined. EFILive does not.
This will be an easy add. It will take some time. Do you need any other tcc parameters. I found a bunch of it, but not sure which one will be needed.
I guess the wish list goes like this.
Minimum Lockup Temp would be nice on a cold day not having to drive 5 miles at highway speed with an unlocked high stall.
Shift Lock Enable switch (the one that lets you change whether the converter stays locked during shifts or not.
Quick TPS vs MPH release tables. These values over-ride the normal release table so that the converter will unlock quickly with rising throttle.
I will look and see if I am missing anything else.
Speaking of trans stuff, I don't know how hard it would be, but is it possible to get the graphs from my spreadsheet in there?
Spreadsheet here
http://www.gearhead-efi.com/Fuel-Inj...4&d=1665603009
No need to re-invent the wheel. But we can make it better
Do you have more info on this. I couldn`t find anything related to it. Maybe some example from commercial programs will help finding it.
I already did some extensive tcc update which is almost done. Any requests for this update are welcomed.
ralmo94, adding some graphing to logger is a good idea, It is definitely on the to do list for future improvements.
Finally some updates are released[at first post of thread]. Added more parameters for Tcc ,transmission, knock tables and more.
Latest version is also uploaded and includes some initial graphing and histograms + lots of overall improvements.
I'm having an issue with fwd v6 BINs - all of the tables that originate from TinyTuner have the Min and Max values in the table config set to 0, so most tables can't be modified. All of the tables I've looked at have the Hard limits min/max at values that make sense, and if I edit the table config to match those (or anything else) then I can actually make changes. The small number of tables added from seek have actual min/max values so I'm guessing it's a problem with the TinyTuner DB somehow? I've tried with several different BINs and they all behave the same way.
Another problem I stumbled upon while trying to figure out what was going on with the min/max values: If right click a table from the list and select "Edit table config" and then make changes, they don't get saved. However editing the values directly in the list does update them. Is this possibly just me misunderstanding what edit table config is used for?
is there a way to edit the table config from the tree view as well, or only from the list view?
And finally on a slightly unrelated note - is it possible to remember the compare view that was selected when changing tables rather than having to choose show compare every time a new table is opened?
Posting Permissions
Reply With Quote
Bookmarks