Results 1 to 14 of 14

Thread: 12587603 bin file for cam swao

  1. #1
    Electronic Ignition!
    Join Date
    Jan 2021
    Age
    66
    Posts
    10

    12587603 bin file for cam swap

    Anyone have a start up file for a 2003 lm7 stage 2 cam swap for that OS?
    considering doing that cam( e1840p)but need a starting file to run before tuning.any help greatly appreciated
    Last edited by Tjmac; 02-10-2021 at 01:43 AM.

  2. #2
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    817
    Hello,
    Need to know what injectors, intake, TB, is engine stock besides valvetrain, which MAF, automatic or manual, cats, exhaust setup?
    -Carl

  3. #3
    Electronic Ignition!
    Join Date
    Jan 2021
    Age
    66
    Posts
    10
    Stock engine stock injectors ls1 intake factory maf sensor no cats dual exhaust 4l60e.going into a 68 firebird.not a racer just looking for a bit of rumble.not max power
    Last edited by Tjmac; 01-28-2021 at 02:30 AM. Reason: Added item

  4. #4
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    817
    Hello,
    Drive by wire or cable, rear end ratio and tire size(ie 275/45/17 or whatever)? See if you can see the injector part number too. Is the computer from your exact combo? Meaning, did you buy an engine/trans/harness/pcm combo? If so, please post a bin file and I'll make you a starting file.
    -Carl

  5. #5
    Electronic Ignition!
    Join Date
    Jan 2021
    Age
    66
    Posts
    10
    Quote Originally Posted by In-Tech View Post
    Hello,
    Drive by wire or cable, rear end ratio and tire size(ie 275/45/17 or whatever)? See if you can see the injector part number too. Is the computer from your exact combo? Meaning, did you buy an engine/trans/harness/pcm combo? If so, please post a bin file and I'll make you a starting file.
    i sent you a pm

  6. #6
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    817
    Yepper, thanks. I'll be posting the bin file here for others to start with since a starting file will help. Tuning "in person" is always better than the next guys "guestimate" lol. My guestimates from doing efi for over 30 years are pretty good, but still nothing like hands on to verify and make fine tune changes. :)
    -Carl

  7. #7
    Electronic Ignition!
    Join Date
    Jan 2021
    Age
    66
    Posts
    10
    Quote Originally Posted by In-Tech View Post
    Yepper, thanks. I'll be posting the bin file here for others to start with since a starting file will help. Tuning "in person" is always better than the next guys "guestimate" lol. My guestimates from doing efi for over 30 years are pretty good, but still nothing like hands on to verify and make fine tune changes. :)
    Any luck with that file carl?

  8. #8
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    817
    Hiya,
    Not yet, I'm buried busy but will try to post this weekend :)
    -Carl

  9. #9
    Electronic Ignition!
    Join Date
    Jan 2021
    Age
    66
    Posts
    10
    Have you had any time yet to assist me?if so let me know what you want for the file.i one's you my email address.ty

  10. #10
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    817
    Here ya go, modded starting file. Lotsa changes :)
    Injectors 12594512
    Cam change
    Tire size 245/50/16
    Gearing is 3:73
    Last edited by In-Tech; 03-15-2021 at 05:32 AM.
    -Carl

  11. #11
    Electronic Ignition!
    Join Date
    Jan 2021
    Age
    66
    Posts
    10
    Thank you so much!! You can man.kudos for your assistance

  12. #12
    Fuel Injected!
    Join Date
    Nov 2017
    Location
    Californiacation
    Age
    57
    Posts
    817
    Oh, also the fuel injector table is setup for a non vacuum fuel regulator.
    -Carl

  13. #13
    Electronic Ignition!
    Join Date
    Jan 2021
    Age
    66
    Posts
    10
    Great.I have a corvette returnless setup

  14. #14
    Fuel Injected! trlrider's Avatar
    Join Date
    Jul 2020
    Location
    Geronimo, TX (Guadalupe County)
    Age
    58
    Posts
    177
    Quote Originally Posted by In-Tech View Post
    Here ya go, modded starting file. Lotsa changes :)
    Injectors 12594512
    Cam change
    Tire size 245/50/16
    Gearing is 3:73
    Jack of all trades, absolutely master of none! Too many projects, not enough time and limited funds.
    Geronimo, Guadalupe County, Texas
    1993 K1500 Suburban - SBC Refit retraining the TBI and Computer Control.
    2004 Z66 Avalanche 5;3 to 6.0 LQ9 upgrade - project pending

Similar Threads

  1. Modified ADX file for 12587603
    By GeoNV in forum OBDII Tuning
    Replies: 2
    Last Post: 10-14-2020, 04:04 AM
  2. 12587603 4.8 auto bin file
    By sturgillbd in forum OBDII Tuning
    Replies: 3
    Last Post: 09-28-2020, 11:55 AM
  3. looking for 12587603 6.0l 4l80e 4x4 bin
    By heatw in forum TunerPro OBDII
    Replies: 4
    Last Post: 09-24-2019, 06:07 AM
  4. 12587603 OS XDF file
    By hodgesmash86 in forum GM EFI Systems
    Replies: 0
    Last Post: 02-13-2018, 05:53 AM
  5. 12587603 XDF file
    By hodgesmash86 in forum TunerPro Tuning Talk
    Replies: 0
    Last Post: 02-13-2018, 04:50 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •