All is not lost on CNP, I'm thinking a Large Cap HEI diameter distributor would be needed for the 48x CNP trigger wheel. I've kicked around the idea of having the CKP and CMP sensors bottom mounted vs. side mounted like the distributor pictured for the 48x trigger wheel. The challenge is keeping the trigger wheel small enough for the CKP sensor to achieve 6000 RPM resolution, yet be a piratical diameter like the large cap HEI diameter. The thought I have, is an almost $1000 custom 48x distributor marketable? The CKP sensor housing pictured is nearly $200, because the material I selected was high temperature nylon - glass filled. The 3D printing process I used to make the CKP housing printed is called Selective Laser Sintering (SLS) http://www.3dsystems.com/quickparts/...-sintering-sls
dave w
Bookmarks