Whatever!!!!!!!!! Gearhead-EFI Edition

[dave w]

That block alone cost more than my entire BBC build in my Camaro And it is NO underperformer


Dave ,

Any idea if the SBC PBM blocks are still made in China ? The BBC blocks used to be World blocks and the SBC stuff was made in China, IIRC PBM now owns World but I really do not remember , things may have changed.......

Anyway , nice looking bullet , care to share any specs ?

TOM

Tom,
I do not have any specs on the engine. I've never seen or heard of PBM blocks until yesterday. I've been called in to help with the EFI wiring stuff only, Hillborn Fuel Injection. ( http://www.hilborninjection.com/prod...d=52&CatId=174 ) I think maybe the budget is somewhat limited because the engine owner has decided on the '0411 PCM instead of the Holley or FAST systems recommended by Hillborn ( http://www.hilborninjection.com/prod...=478&CatId=258 ) ( http://www.hilborninjection.com/prod...=425&CatId=233 ).

dave w

[RobertISaar]

i'd like to think that the 0411 has the potential for better drivability. then again, with individual runners..... i don't know.

i imagine at least one of the OS that runs on the 0411 has been hacked to some extreme level that would happily run in alpha-n?

[EagleMark]

You guys will never believe who is doing well and got out of the hospital today and came home...

[Nasty-Z]

You guys will never believe who is doing well and got out of the hospital today and came home...

Wooooooooooooooooooooooooooooooooooooooooooooooooo oooo Hooooooooooooooooooooooooooooooooooooooooooooooooo ooooooooo




Some good news right there Mark !!

TOM

[Nasty-Z]

I think maybe the budget is somewhat limited because the engine owner has decided on the '0411 PCM instead of the Holley or FAST systems recommended by Hillborn

Make no mistake about it , with that pile of aluminum on that stand , it was NOT a budget build


I do not know a thing about the 0411 or the Holley or FAST for that matter , but I am a giddy as a school girl to see how you do with this Dave.

What is this going in ?

TOM

[EagleMark]

So she's home about 30 minutes and sits down to watch TV... "So you buy a new bigger TV while I'm in the hospital?"

Ha! It was your birthday present remember? She went back in hospital before her birthday and it arrived! She started crying and thanked me for remembering her birthday, then realized how long she has been gone!

[devind]

That is some great news!!
It is great to hear she is back at home.

[Six_Shooter]

Yeah great to hear that things are starting to look up. :)

I wish I had already sold my truck before Friday night I was offered a Haltech Platinum 1000 system for dirt. :( Unfortunately, or maybe fortunately one of the guys I hang with is getting it, for his Supra, so it's not far, but I REALLY wish I would have been able to scrape the dough together. :(

[dave w]

That is some great news!!
It is great to hear she is back at home.

What he said X2!!

dave w

[dave w]

Make no mistake about it , with that pile of aluminum on that stand , it was NOT a budget build


I do not know a thing about the 0411 or the Holley or FAST for that matter , but I am a giddy as a school girl to see how you do with this Dave.

What is this going in ?

TOM

Tom,
I'm in the dark on most all the details on this engine build. I'm building a custom wiring harness based on the 2002 Express Van 5.7 liter. I'm hoping for more business from this company.

dave w

[jim_in_dorris]

Mark, That is fantastic news. I am so glad for the two of you.

[gregs78cam]

That is very good to hear, Mark.

[Six_Shooter]

Just a picture I took for another forum I'm on, thought I'd post it here...

I think I have a problem.

[EagleMark]

Three out of five ain't bad odds?

[Six_Shooter]

They're all on different settings. ;)

The problem I was referring to was that I have so many DMMs, and I want a couple more, though I want to get a couple bench style, I have enough hand helds.