Whatever!!!!!!!!! Gearhead-EFI Edition

[JeepsAndGuns]

Ok chevy people, let me ask you a question and see if yall can answer it.
What is the difference between 2002 and 2003 model chevy 2500HD's brake master cylinders? Looking at pictures online, they look almost identical, and have the same bore size. Is it something like the bolt hole spacing or brake line threads? The hydroboost units have different part numbers too, but also look the same.
Long story short, I am modding the front 1 ton axle for my jeep to use the calipers from that year range truck, and the rear axle uses calipers virtually identical to what would be on the rear of those trucks. Since I am already running a chevy hydroboost, I figured it would be best to run a MC from the same year range truck the calipers came from.
It looks like one year range is like 99-02, then next is 03-07. While the calipers are the same from 99-10. So I cant figure out the difference. Anyone have any idea?

[delcowizzid]

taking the 202 cube straight 6 turbo convert for a cruise man its smooth so much fun to cruise in

[1project2many]

Aww, man! How come I've got to drive the Ferrari?!!

https://www.youtube.com/watch?v=WREyAicJXkM

[delcowizzid]

haha a pushy at 50kmh is scary enough let alone 333kmh LOL

[dave w]

Some of the members here know I work at a HP site. I'm sometimes asked, "can you get me a deal on an HP product?" Here is what I can do. The deals can be hit or miss?

https://h41183.www4.hp.com/pps-offer...t=notebook_pcs

or

https://h41183.www4.hp.com/pps-offers.php

dave w

[delcowizzid]

just got back from the drags got kicked out for going to fast time to step up to a proper bigboys class LOL
10.8@127 on stock parts

[dave w]

just got back from the drags got kicked out for going to fast time to step up to a proper bigboys class LOL
10.8@127 on stock parts

You sure made that other car look slow.

dave w

[1project2many]

just got back from the drags got kicked out for going to fast time to step up to a proper bigboys class LOL
10.8@127 on stock parts

Haha... Nice! But slow it down 'cause it's gonna cost more to play with the big boys.

I have friend that runs an old Vette for fun. He's probably about 70 now and this is just for kicks. Showed up at the track a couple of years ago and accidentally went into the 11's a couple of times and they said "Helmet!" So he gets an old helmet. Next time at the track, he puts the helmet on and can't see anything! Up, down, left, right... all black. He feels knocking on the helmet, takes it off, and sees the track guy outside swirling his hand around and around. It took a bit but my friend finally realized he had the helmet on backward! After that when I burned a chip for him I'd usually ask if he needed any changes made in reverse!

[delcowizzid]

haha yeah we will be the only 6 cylinder in super sedan if we step up and the only people running a $150 high km engine in the 10's LOL

[1project2many]

I like running as the underdog. I just love the looks people give when they realize what you're doing and the equipment you're using. But it can be a lot more work at the end of a year. As long as its fun though. I love the vids... keep 'em coming.

[delcowizzid]

this was last week racing 1/8th street drags against 900hp blown meth mustang LOL

[dave w]

3D Printer part is used to lift a car.

dave w

https://www.youtube.com/watch?v=QhZAiNkAb_E

[Six_Shooter]

So, I just finished watching The Interview.

I don't see what all the hoopla was about concerning releasing it.

It's a typical Rogan/Franco comedy. Actually to be honest it's a little better than that.

It's not a "must see" but if you have a couple hours to waste and you're caught up on everything else, it's good for that.

[JeepsAndGuns]

Yea I have been kinda watching the media madhouse thats been going on with it. I wouldnt mind seeing it cause it looks kinda funny. But its not playing here.

[steveo]

I don't see what all the hoopla was about concerning releasing it.

gotta remember, for north koreans, this guy is literally their god, they have been brainwashed as such.

it's not like someone making fun of obama or whatever, it's more along the lines of walking into a bar in the bible belt and calling jesus a dumbass.

still, who cares? i don't, i believe in the right of people to make terrible movies with no real content or depth of humor (and this is one of them, it sucked)

but i do understand. they don't get it, since they dont have perspective. they don't know the difference between movies and government propaganda because in their country, there's no such distinction, they just assume the american government had something to do with it, since that's how their country works.

just for a look in the mirror, i do know of some folks who would probably start shooting at my house if i made a movie about jesus flying helicopters around looking like a total dumbass or whatever.

they also do kill the guy, which maybe takes it a bit too far? seen any movies lately where the american president gets capped?

imo