Hello all. I'm fairly new with playing around with the ls platform stuff as I used to work in the import world. I have installed e-fans on my 2002 Suburban. So far the fans work based off the temperature that I input into tuner pro but the A/C does not activate the fans. I have read that I need to change the A/C type from analog cycling to analog for the pcm to recognize the new pressure sensor I installed. I can't seem to find an XDF that has A/C type defined or the hex address so that I could change it. I do have a hex editor as I used to burn chips for Mitsubishi's back before you could flash. I don't know how to dissect code so I can't just find it myself. Any help would be much appreciated.

Thanks,
Jeremy