Hello,
New to the forum and tuning in general so cut me some slack :) I built an 86 iroc with a 305 TPI 5 speed manual trans. Borg warner 3.45 rear. I have the BCC AKFX 2427 for the 165 ecm. The closest one i could find is AKFT. Does anyone have the AKFX available for download? The car runs pretty good considering it has a mild cam, vette heads and full exhaust but it needs tweaking so i want to get the closest bin i can to what i already have. Any help would be greatly appreciated. Thank you!!
your BCC may have been superseded. Maybe someone (EagleMark) can explain where they find out if its been updated.
87 4Runner, 15" spring lift, 3" body, chevy vortec 355, 5.29 gears, 38.5x15.5x15" Boggers, 280hr, 16168625 running $0D
93 S10, 36x12.5x15 TSL's, custom turbo headers, 266HR cam, p&p vortec heads, $0D Marine MPFI with 8psi boost.
05 Silverado, 2' lift, 4" exhaust, Bully Dog programmer,
Well if you have it you can read it. But it was superseded (GM Upgrade for some reason) to ANPK so that would be a better start.
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
Ah ok, Thank you. I will download that bin and see if i can find any differences (if any) and see if the car runs with that one.
Sometimes a supercedded bin changes are not defined in the mask, therefore can not be found unless you read hex, dissasembly/hacks. But sure would be better start if GM found a reason to change it...
1990 Chevy Suburban 5.7L Auto ECM 1227747 $42!
1998 Chevy Silverado 5.7L Vortec 0411 Swap to RoadRunner!
-= =-
I have a 88 305/5spd w/3.45 AKFY bin and was unable to locate it for download also. Wound up buying the moates adapter and reading it from my chip
Posting Permissions
Reply With Quote
Bookmarks