No values in TunerPro

[sachem]

Hello all,
I hope I don't sound stupid, but for the last few weeks I've been searching all the forums to try to understand the tuning procedure. One issue I have is that when I open a bin file in TunerPro, no information is available to view. For example, I used pcm hammer to pull the bin for my 1mb PCM (Operating System 12592618 Engine Calibration 12591922) there is nothing showing what transmission it is calibrated for, doesn't show what engine size. Should it or am I just completed lost?

[B52Bombardier1]

Hello,

Have you also opened an XDF file within Tuner Pro RT that matches OS 12592618?

Rick

[sachem]

I have not been able to find one for that OS. One of forums suggested using the 1mb XDF for OS 12587603. I've been using that one. I am trying to swap the 4L60e for a 4L80e segment, but I don't see how you would know what trans calibration is programmed now vs the new trans. What would show me that info. And how would I know that swap segment is actually the one I need?

[B52Bombardier1]

I have a 7603 with a 4L80E in it but its for a 4.8 liter engine. What engine are you going to in your swap?

Rick

[sachem]

I have a 6.0 LQ9.

[B52Bombardier1]

I also have a 7603 BIN with a 6.0 motor. These are in the 2004 BIN area on the site here. Segment swap the 7603 parts you need to build the required BIN.

Rick