Results 1 to 1 of 1

Thread: 383 500hp LT1, looking for bin file or tips

  1. #1
    Fuel Injected!
    Join Date
    Jan 2015
    Age
    33
    Posts
    30

    Cool 383 500hp LT1, looking for bin file or tips

    Hi guys,
    I'll be doing the programming for a 500hp LT1 from Golen engines this weekend!

    I'm already pretty much into $EE, but it would be great to have a good starting point for this engine. VE tables should be easy, as I have the torque curve, I just don't have much information about the timing.
    The injectors are Bosch 36lb @43.5 psi, I've already found offsets etc, but if someone has good values for the $EE, it would be great too!
    The compression is 11.5:1, total ignition timing should be 38 degrees WOT, I don't know whats recommended for idle, or how the timing should be in general for such an agressive cam. (Duration@.50 236/242, Lift .580"/.576", LSA 114)

    I attached the torque curve, jfyi and if it helps for the timing

    BTW if someone has a good .bin for an LT1 with a LT4 hotcam I also whould be thankful, this is for another project ;)

    Best regards,
    Max
    Attached Images Attached Images

Similar Threads

  1. Help needs tips and files
    By Roadkill_se in forum OBDII Tuning
    Replies: 1
    Last Post: 08-07-2020, 04:53 PM
  2. Garage tips/trick/hacks
    By kacy in forum Gear Heads
    Replies: 1
    Last Post: 05-01-2019, 04:09 AM
  3. need adjustment tips for tunerpro bin
    By HSR383 in forum GM EFI Systems
    Replies: 4
    Last Post: 04-22-2019, 11:27 PM
  4. Tips on how to log a run with a manual transmission
    By beestoys in forum GM EFI Systems
    Replies: 5
    Last Post: 02-11-2014, 09:06 PM
  5. looking for thoughts and tips on tuning SA tables
    By 1leg in forum GM EFI Systems
    Replies: 7
    Last Post: 03-06-2012, 06:20 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •