Hi guys,
I'll be doing the programming for a 500hp LT1 from Golen engines this weekend!
I'm already pretty much into $EE, but it would be great to have a good starting point for this engine. VE tables should be easy, as I have the torque curve, I just don't have much information about the timing.
The injectors are Bosch 36lb @43.5 psi, I've already found offsets etc, but if someone has good values for the $EE, it would be great too!
The compression is 11.5:1, total ignition timing should be 38 degrees WOT, I don't know whats recommended for idle, or how the timing should be in general for such an agressive cam. (Duration@.50 236/242, Lift .580"/.576", LSA 114)
I attached the torque curve, jfyi and if it helps for the timing
BTW if someone has a good .bin for an LT1 with a LT4 hotcam I also whould be thankful, this is for another project ;)
Best regards,
Max
Bookmarks