Results 1 to 4 of 4

Thread: Hello

  1. #1
    Carb and Points!
    Join Date
    Oct 2020
    Age
    57
    Posts
    2

    Hello

    I joined to learn about reprogramming my ecm for my ls swap. I have a 1988 firebird that I swapped a 2007 5.3 into. It is an original 5 speed car and I will be using the T5 trans. I' trying to delete vats and rear O2 sensors and whatever needs
    to be removed. I have the bin file from my ecm just trying to figure out the process of loading it into Tuner Pro to make the needed changes. Any advice would be greatly appreciated.

    Thanks for adding me to the group
    Dave Jackson

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268


    Maybe the TunerPro .xdf file is in this link:http://www.gearhead-efi.com/Fuel-Inj...2-OBDII-Tuning

    dave w

  3. #3
    Carb and Points!
    Join Date
    Oct 2020
    Age
    57
    Posts
    2
    Thanks Dave. I didn't see any bin files or xdf files that match my pcm. Service no.12602802 hardware no. 12589162 OS no.12597120 I guess my application is an oddball.

  4. #4
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,268
    That's a very real possibility. It's taken nearly 20 years of "Hacking" to get the 512K PCM's (1999 - 2002) figured out. The 2003+ PCM are 1 meg or more. It's going to take time to figure out the 1 meg+ PCM's.

    dave w

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •