ok... i think i have an issue. downloaded my xdf,bin and ads should be stock files,installed my g adapter in the truck (95 c1500 5.7 with7427) memcal, truck ran but with high idle 1500rpm+\- shut truck down checked a few thing. tried to restart and no start, pulled autoprom installed the memcal chip(stock) back in to see if i screwed up the bin some how and no start but now it dumps(will fill the bore with fuel) fuel out of one injector and the other is dead. so needless to say my fist attempt at tuning is a fail lol. truck is all stock but trying to learn tuning before i put the fastburn in it, so some direction is greatly appreciated.