Ok so far I have registered Tunerpro R/T and am able to read ECU's on a scan tool with my test harness powered up so that is working properly. I still have not been able to initialize hardware, I am running a USB to Serial adapter cable and Serial to 0BD2 adapter together. The hardware is an NXT serial to USB cable, I have the driver downloaded and the file shows up when I go to load ADX . When I go to select ADX and open it just goes away and says no items match my search. Not really having any trouble with the software, I just have not been able to connect to an ECU. All other options, dashboard, emulation Ect. are off and will not open without the hardware connected. Not exactly sure what I am doing wrong this software is new to me so any tips or advice would be appreciated.