Results 1 to 6 of 6

Thread: Serial Port Pins on EBL Flash II

  1. #1
    Carb and Points! C3Ferrari's Avatar
    Join Date
    Dec 2017
    Location
    Flowery Branch, Georgia
    Age
    69
    Posts
    4

    Serial Port Pins on EBL Flash II

    Does anyone know what pins are used for the Serial Port interface on the Flash II ECM are (Data+, Data-, Return). I know they are D10, D11, and D12, but which one is which? I have a new unit I just installed into an '89 Corvette (it's TPI, so I have the Port Mod, if that matters), and it won't communicate with my laptop. Any help or ideas would be greatly appreciated.

  2. #2
    Super Moderator dave w's Avatar
    Join Date
    Feb 2011
    Posts
    6,264

  3. #3
    Carb and Points! C3Ferrari's Avatar
    Join Date
    Dec 2017
    Location
    Flowery Branch, Georgia
    Age
    69
    Posts
    4
    Been all through everything on the site, but none of his wiring diagrams have the serial port pins on them!

  4. #4
    GearHead-EFI Vendor!
    Join Date
    Dec 2011
    Posts
    21
    Recall that the serial data at the ECM is 5V (TTL), don't go anywhere near 12V or it will pop the port on the micro-controllers.

    D10 is RX to the EBL ECM
    D11 is TX from the EBL ECM
    D12 is ground

    For the most part TX is always active (ECM powered up). RX is active when flashing and when a bank selection is made.

    RBob.

  5. #5
    Carb and Points! C3Ferrari's Avatar
    Join Date
    Dec 2017
    Location
    Flowery Branch, Georgia
    Age
    69
    Posts
    4
    Thanks!

  6. #6
    Carb and Points! Robertcladner's Avatar
    Join Date
    Oct 2020
    Location
    Clifton
    Age
    73
    Posts
    1
    thanks for this post, my problem has been fixed too.

Similar Threads

  1. Connector pins for 727 ECM
    By Rebuildman in forum GM EFI Systems
    Replies: 2
    Last Post: 08-17-2019, 02:34 PM
  2. Serial Port Monitor or Sniffer
    By Caleditor in forum Other EFI systems and related topics
    Replies: 6
    Last Post: 04-11-2019, 05:54 PM
  3. 1227747 connector pins?
    By plazomat in forum GM EFI Systems
    Replies: 2
    Last Post: 02-18-2017, 04:07 AM
  4. 1227747 connector pins
    By uncabob in forum Introductions
    Replies: 8
    Last Post: 07-08-2016, 07:49 AM
  5. 7427 pcm connector pins for 4L80e??
    By Blazer3664 in forum GM EFI Systems
    Replies: 10
    Last Post: 12-28-2012, 08:55 AM

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •